Manual

1. Which photo to choose?
• It is best to zoom as close as possible to ensure the best possible level of detail
  

  
• It is crucial that the main object has fairly high contrast
  

  
• Brightness of the background has a strong influence on brightness of the main object
  

  
2. How to use the online-generator?
1. Go to zagobrix.com.ua/generator or scan the QR code on the box
   
2. Enter the access code to the generator shown on the first page of the of your printed manual
3. Click the "Upload" button and select an image, while keeping in mind the recommendations from “Which photo to choose”
   Upload
   
4. Select model 2000 model type
   Diamond painting model 2000
5. Select the desired area of the photo to generate
6. The generator will offer 9 variants of processed images - choose the one you like the most
7. Get your personal assembly scheme via e-mail or as a direct download. We recommend printing it out for convenience.
3. Assembly manual (scheme) contents
1. Open the file with the instructions.
2. Assembly manual is divided into 100 sectors, 15 by 15 diamonds each
3. Each sector is numbered accordingly to its position on the canvas
4. Each color has a number assiciated with it. For your convenience the numbers are also on the diamond bags
   
5. The sectors also feature internal numbering. Cells which contain numbers are also a part of the sector they are in and should be filled according to the assembly manual. The numbers they contain on the canvas are for positioning purposes only
4. How to use assemble a diamond painting?
1. First of all, prepare a working surface. It must be dry, large enough to place all the needed materials and well-lit.
2. Place all the parts of the kit so that you can access them conveniently
3. Neatly place the printed assembly schematic or a device with it open such that they don’t interfere when accessing the canvas and diamonds
4. Choose a sector you would like to assemble, so that it is visible on the schematic
5. Prepare the needed diamonds
6. Press the end of the stylus to the gel-glue to grease it in it
7. Peel off the area of protective film above the sector you are planning to assemble
8. Use the stylus to pick a diamond and place it on the cell according to the assembly manual (schematic). Gently press it to the canvas for strng fixation. Be careful to put the diamonds close to one another to form a dense grid and avoid blank spaces in between
9. If the stylus stops holding the diamonds - grease it with the glue once again